Brand Name:Honbro
Certification:CE certification
Place of Origin:Dongguan, China
Minimum Order:one set
Price:negotiation
Payment Terms:T/T, L/C, D/A, D/P, Western Union, MoneyGram
Supply Ability:350 sets/year
Delivery Time:lab machine: 7-8 weeks, Mass production machine: 13-14 weeks
Packaging Details:Fumigation-free wooden box and vacuum moisture-proof treatment
Model Number:Turntable type
Filling amount:0~770g
Filling pump accuracy:±0.2%
Filling accuracy:±1.1%
Weigh accuracy:±0.1g
Turntable Electrolyte Filling Machine For Blue Tooth Battery
Function Description
- The equipment is mainly used for automatic conventional/vacuum injection of lithium battery with prismatic Al shell battery. The conveyor belt coming material, scan code before filling, short-circuit & Hi-pot test, Weigh before filling, bad product sortingcollection, automatic liquid injection on the fixture, sealing detection before filling, automatic routine, high and low voltage soaking, filling cup residual liquid collection. Filling cup and nozzle clean, after injection liquid conveyer belt clamp, liquid injection after weighing, automatic liquid injection DMC clean nozzle, note on the liquid glue nail, plastic nail detection, conveyor belt discharging, etc.
Technical Parameters
- njection method: no pressure difference injection inside and outside the battery
- Prevent the shell from deforming during the positive and negative pressure standing of the battery
during liquid injection
- Shorten the soaking time of battery and improve the efficiency of equipment
- During liquid injection, the positive pressure of nitrogen inside and outside the battery is ≤ 0.6mpa
- Add cleaning system of injection cup and injection nozzle before injection to improve injection
accuracy and avoid secondary pollution of injection nozzle to battery
- Add residual liquid connection system after liquid injection to avoid contamination of battery shell
by electrolyte
- Tapered injection nozzle is adopted to avoid the steps of battery injection mouth and the electrolyte
at right Angle connection cannot be cleaned
- The production capacity of the equipment is not limited by the static process time. When the
production capacity remains unchanged or increases and the public practice increases, the injection
unit can be added to meet the production requirements
Technical Parameters
| Item |
Common parameter |
| Outlook size |
L7200mm×W6200mm×H2800mm |
| Machine Weight |
≈15T |
| Power rate |
15KW |
| Power supply |
AC380V/50Hz |
| Air source |
≥0.7MPa 30L/s(Utilization rate 50%) |
| Vacuum source |
≤-95kPa 60L/s |
| Nitrogen |
≥0.6MPa 60L/s |
| Scope of applicable products |
L (100~200mm)×W(100~175mm)
×T(15~30mm)
|
| Equipment output |
≥6PPM(Total standing time ≤25min) |
| Qualified rate |
≥99.5% |
| Action |
≥97% |
| Filling amount |
0~770g |
| Filling pump accuracy |
±0.2% |
| Filling accuracy |
±1.1% |
| Weigh accuracy |
±0.1g |